Building Inspection Tips – Working with a New Home Hand-Over Inspection

Stay Connected

When the builders complete their construction works, they contact the city administration and have the inspectors run their routine inspections. Once the city approves it, the builder may typical give a chance for you to walk through or do a building inspection on your own. It is the time when you get an opportunity to inspect your future.

Just because the construction passed the initial city inspection, it doesn’t mean everything is perfect. They usually verify that the building is constructed by meeting the code. Typically, the city inspectors may not care for the cosmetic flaws, and they also may not inspect the issues like a leaky faucet or scratch on the floor.

Tips for a successful building inspection

A reliable provider can be approached for a home-owner building inspection to identify the flaws and get it done by the builder to your satisfaction. Here are some essential elements to know while working with a building inspector.

Prepare your list

The builder’s representative or inspector is not sufficiently reliable when you have to make the home inspection checklist. It is always better to prepare your list for inspection. Also, make sure that you get the proof of delivery of the listing to the builder. You can get the assistance of a building inspections Melbourne expert to prepare this checklist to avoid any dispute later.

Ensure that the following items are there is on your list for sure:

Electrical

  • Inspection of each fixture to ensure proper installation and that there are no broken parts.
  • Turn each light on and off to ensure proper working.
  • Plug in an apparatus to every electrical outlet to make sure it functions.
  • Test the doorbell, two-way switches, and power switches for proper functionality.

Plumbing fixtures

  • Turn on and off all faucets to ensure all works efficiently.
  • Run all plumbing fixture for five to ten minutes, check for any leak at the base, drips through the faucet, or leak through the walls.

Heating and cooling

  • Turn the heater on and listen to its working.
  • Check the air coming out of vents.
  • Check if the convectors or radiators are getting warm during working.
  • Set the thermostat five degrees over room temperature to check its function.
  • Turn the air conditioner on and listen to how it’s working.
  • Check the air quality coming out of the vents.
  • Set the thermostat five degrees below room temperature.

Other significant considerations to make are

Kitchen – Countertops, cabinets, drawers, and other appliances.

Bath – Inspect the bathtub, sink, shower, and toilet.

Windows – Check the glasses for cracks, fast closing and easy opening, hinges, and hardware.

Doors – Easy opening and closing, paint, top and bottom edges lock and unlock.

Walls – Check for the finish and smoothness, drywall, nail heads, and color correction.

Floors – Check for floor moldings, smooth finish, broken or chipped floor tiles.

Decks and porch – Check for the sturdiness, any exposed screws or nails.

Garage – Door opening and closing and the electric light bulb etc.

Along with the interiors, the exterior also needs to be thoroughly inspected well. An ideal checklist is a way to tell the builder what you need to make your home completed before purchase. The help of a skilled and licensed inspector will be handy if you want to do a thorough home inspection check.

Share this:
Share this page via Email Share this page via Stumble Upon Share this page via Digg this Share this page via Facebook Share this page via Twitter